ar8310l2001va

Remove/install actuator motor for fresh and recirculated air flaps

Type ar · topic 83.10 · version 0100 · 2003-03-12

Applies to: MODEL 414.700

Where it sits

Function group 3 Body › 83 Climate control › 83.10 Ventilation — Series 414 (models 700)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.30 Blower motor/actuator motor — Series 414 (models 700)

AR83.10-L-2001VA

Remove/install actuator motor for fresh and recirculated air flaps

20.8.01

MODEL 414.700

Remove/install actuator motor for fresh and recirculated air flaps

L83.10-0006-06

1 Air duct

2 Screw

3 Fresh air/recirculated air flap actuator motor connector

4 Cam

M16/7 Fresh air/recirculated air flaps actuator motor

Remove/install

1

Remove instrument panel

AR68.10-L-1000VA

2

Unclip air duct (1)

Note correct installation positions.

3

Disconnect fresh air/recirculated air flap actuator motor (M16/7)

4

Remove fresh air/recirculated air flap actuator motor (M16/7)

Installation: The fresh air/recirculated air flap actuator motor (M16/7) should engage in the hexagonal shaft on the
cam (4).

5

Install in the reverse order

6

Check fresh air/recirculated air flap actuator motor for proper function

Ensure that air flaps open and close completely.

Referenced documents