Remove/install air distribution flap actuator motor

AR83.10-D-2040TSA

Remove/install air distribution flap actuator motor

31.10.2019

Model

907, 910

except code HH4 (THERMOTRONIC automatic climate control)

except code HH9 (Air conditioner, automatic heater control)

Modification notes

29.10.2019

"Teach in and normalize actuator motor (1) and erase fault memory using vehicle diagnosis system", added.

Operation step 6

Shown on model 907.### 1#

1

Actuator motor

3

Electrical connector

2

Bolts

4

Driver

Shown on model 910.### 2#

1

Actuator motor

3

Electrical connector

2

Bolts

4

Driver

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1.1

Remove blower motor.

Model 907.### 1#, model 910.### 1#

AR83.25-D-1200TS

1.2

Remove center trim on instrument panel.

Model 907.### 2#, model 910.### 2#

AR68.10-D-0001TS

2

Remove screw/bolts (2) .

3

Remove actuator motor (1) until the electrical connector (3) is accessible.

4

Disconnect electrical connector (3) and remove actuator motor (1).

 Installation: Ensure that the truncation (arrow A) of the driver (4) is aligned with the truncation (arrow B) of the actuator motor (1).

5

Install in the reverse order.

6

Teach in and normalize actuator motor (1) and erase fault memory using vehicle diagnosis system.



AD00.00-D-2000-06TS



Check

7

Carry out function test of actuator motor (1).