ar8295p0004rt

Removing and installing backup antenna for Tele Aid emergency call system

Type ar · topic 82.95 · version 0100 · 2005-05-31

Applies to: MODELS 251 with CODE (359) TELE AID emergency call system with CODE (494) USA version

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.95 Emergency call system — Series 251

EinPAS 31 Communication/information/entertainment › 31.80 Antenna/antenna amplifier › 31.80.14 Transmitter/receiver — Series 251

AR82.95-P-0004RT

Removing and installing backup antenna for Tele Aid emergency call system

24.2.05

MODELS 251
with CODE (359) TELE AID emergency call system
with CODE (494) USA version

Removing and installing backup antenna for Tele Aid emergency call system

P82.95-2607-06

1 Trim panel

2 Antenna cable connector

3 Nuts

A2/50 TELE AID backup antenna

Remove/Install

1

Switch off ignition and remove the transmitter key from the EIS [EZS] control unit

On vehicles with Keyless Go, code 889: Press keyless go start/stop button repeatedly until ignition is switched off Remove transmitter key from vehicle and store it in a location beyond its transmission range (at least 2 m).

2

Remove paneling (1) in the side of the luggage compartment

AR68.30-P-4800RT

3

Disconnect antenna cable connector (2)

4

Unscrew nuts (3) and remove TELE AID backup antenna (A2/50)

5

Install in the reverse order

Referenced documents