ar8295p0002rt

Remove/install Tele-Aid emergency call system pushbutton switch

Type ar · topic 82.95 · version 0100 · 2005-06-23

Applies to: MODEL 251 with CODE (359) TELE AID emergency call system with CODE (494) USA version

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.95 Emergency call system — Series 251

EinPAS 31 Communication/information/entertainment › 31.22 Emergency call system › 31.22.12 Sensor/switch/wiring harness — Series 251

AR82.95-P-0002RT

Remove/install Tele-Aid emergency call system pushbutton switch

24.2.05

MODEL 251
with CODE (359) TELE AID emergency call system
with CODE (494) USA version

Remove/install Tele-Aid emergency call system pushbutton switch

P82.95-2572-06

1 Electrical connector

N70 Overhead control panel control unit

S93/3 SOS pushbutton switch

Remove/install

1

Detach overhead control panel control module (N70)

Treat ribbon cable carefully to prevent damage

AR82.20-P-1100RT

It is not necessary to disconnect the overhead control panel control module electrically!Do not disconnect ground line from battery.

2

Disconnect electrical connector (1).

3

Press SOS pushbutton switch (S93/3) out of overhead control panel control module (N70) downward and remove

Installation: Insert SOS pushbutton switch into overhead control panel control module so that guide stays (arrows) engage properly.

Installation: Clip in carefully to prevent damaging the cable on the SOS pushbutton switch (S93/3).

4

Install in the reverse order

Referenced documents