ar8295p0002a

Removing and installing TELE AID emergency call system pushbutton switch

Type ar · topic 82.95 · version 0100 · 1998-09-22

Applies to: MODEL 140.03 /04 /05 with CODE (348) TELE AID emergency call system

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.95 Emergency call system — Series 140 (models 03*, 04*, 05*)

EinPAS 31 Communication/information/entertainment › 31.22 Emergency call system › 31.22.12 Sensor/switch/wiring harness — Series 140 (models 03*, 04*, 05*)

AR82.95-P-0002A

Removing and installing TELE AID emergency call system pushbutton switch

27.4.98

MODEL 140.03 /04 /05 with CODE (348) TELE AID emergency call system

Removing and installing TELE AID emergency call system pushbutton switch

P82.95-2028-06

1 SOS flap

B10/4 In-car temperature sensor

S93/3 TELE AID pushbutton switch

S93/3x1 TELE AID pushbutton switch connector

Removal, installation

1

Disconnect ground lead from battery

2

Remove overhead control panel control module

Disconnect TELE AID pushbutton switch connector (S93/3x1)

3

Release in-car temperature sensor (B10/4) by turning slightly to right and pull upward

4

Open SOS flap (1)

5

Unclip TELE AID pushbutton switch (S93/3) and screw out downward

6

Install in opposite order