Shown on left and right multifunction steering wheel button group (S110, S111) |
1 | Multifunction steering wheel |
2 | Driver airbag |
5 | Cover |
S110 | Left multifunction steering wheel button group |
S111 | Right multifunction steering wheel button group |
W82.90-A011-81
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Disassemble/assemble | ||
1 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
2.1 | Remove cover. | Vehicles without code S3A (Driver airbag) | |
Long wedge | |||
2.2 | Remove driver's airbag (2) from multifunction steering wheel (1). | Vehicles with code S3A (Driver airbag) | |
3 | Disconnect electrical connectors from right multifunction steering wheel button group (S111). | ||
4 | Unclip cover (5) with left multifunction steering wheel button group (S110) and right multifunction steering wheel button group (S111) from multifunction steering wheel (1). | Pull up cover (5) with your hands on both sides and unclip. | |
Installation: Wet holders and catch tabs with lubricant. | |||
Lubricant, rubber assembly 1 l | |||
5 | Unscrew screws and remove left multifunction steering wheel button group (S110) with right multifunction steering wheel button group (S111) from cover (5). | Only if cover (5) or left and right multifunction steering wheel button group (S110, S111) is being replaced. | |
6 | Assemble in the reverse order. |
115 589 03 59 00
Long wedge
Referenced documents
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar9160w0660h Remove/install airbag unit on steering wheel