Remove/install communication unit on radio/navigation unit

AR82.85-P-2000SR

Remove/install communication unit on radio/navigation unit

01.03.2018

Model

453

with code 535 (smart Media system)

1

Cover

2

Electrical connector

3

Screw

A40/3

smart radio multimedia navigator

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Commission Smart Radio Multimedia Navigator (A40/3)

When replacing the Smart Radio Multimedia Navigator (A40/3).



AD00.00-P-2000-06SR

 Installation: The SD card must be replaced when replacing the Smart Radio Multimedia Navigator (A40/3).

2

Switch off ignition and remove ignition key from ignition lock

3

Unclip cover (1)


Carefully unclip cover (1) at bottom and remove upwards.
Otherwise, the cover (1) will be damaged and it must be replaced.

 Do not disconnect electrical connector (2) from cover (1).

 Mounting wedge

*110589035900

4

Remove screws (3)

5

Use assembly wedge to release Smart Radio Multimedia Navigator (A40/3)


Use assembly wedge to release Smart Radio Multimedia Navigator (A40/3)  .
Otherwise, the Smart Radio Multimedia Navigator (A40/3) will be damaged and it must be replaced.

 Mounting wedge

*110589035900

6

Remove Smart Radio Multimedia Navigator (A40/3) and disconnect electrical connectors from rear of Smart Radio Multimedia Navigator (A40/3)

7

Install in the reverse order