ar8270p0010c

Removing and installing GSM 1800 MHz network compensator

Type ar · topic 82.70 · version 0101 · 2012-02-23

Applies to: MODEL 210.2 with CODE (854) MB cellular telephone

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.70 Telephone, Voice-control-system(VCS) — Series 210 (models 2**)

EinPAS 31 Communication/information/entertainment › 31.15 Telephony › 31.15.11 Control unit/relay/contact plate — Series 210 (models 2**)

AR82.70-P-0010C

Removing and installing GSM 1800 MHz network compensator

21.2.12

MODEL 210.2 with CODE (854) MB cellular telephone

Removing and installing GSM 1800 MHz network compensator

P82.70-3164-06

1 Cradle

3 Screw (3 ea.)

5 Sheet metal screws

A28/3 E-network compensator

Removal, installation

1

Connect quiescent current retention unit

AR54.10-P-1030-07I

*WH58.30-Z-1012-09A

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

2

Disconnect ground cable of battery

Insulate cable terminal of ground lead to prevent unintentional contact between the disconnected ground lead and ground point W10.

AR54.10-P-0003A

Notes on battery

All models.

AH54.10-P-0001-01A

3

Open cover on right in load compartment

4

Unscrew screws (3)

5

Remove cradle for CD changer (1)

5

Loosen sheet metal screws (5)

6

Release connector on E-network compensator (A28/3) and disconnect

7

Unscrew antenna connections

8

Remove E-network compensator (A28/3)

9

Install in the reverse order

Commercially available tools

Number

Designation

WH58.30-Z-1012-09A

Quiescent current retention unit

Referenced documents