ar8270p0010ac

Removing and installing GSM 1800 MHz network compensator

Type ar · topic 82.70 · version 0101 · 2012-02-23

Applies to: MODEL 208.3 as of 1.7.00 with CODE (854) MB cellular telephone

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.70 Telephone, Voice-control-system(VCS) — Series 208 (models 3**)

EinPAS 31 Communication/information/entertainment › 31.15 Telephony › 31.15.11 Control unit/relay/contact plate — Series 208 (models 3**)

AR82.70-P-0010AC

Removing and installing GSM 1800 MHz network compensator

21.2.12

MODEL 208.3 as of 1.7.00 with CODE (854) MB cellular telephone

Removing and installing GSM 1800 MHz network compensator

P82.70-3310-06

1 Cradle

2 Sheet metal screws (2 ea.)

3 Nut

A28/3 E-network compensator

A34/4 CTEL [TEL] interface

Removal, installation

1

Connect quiescent current retention unit

*WH58.30-Z-1012-09A

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

2

Disconnect ground cable of battery

AR54.10-P-0003A

Notes on battery

All models

AH54.10-P-0001-01A

3

Remove side cover on left side of trunk

4

Unscrew nut (3)

5

Carefully remove holder (1) with control modules

Do not damage connection lines.

Do not kink or stretch D2B fiber optic cable.

6

Release connector on E-network compensator (A28/3) and disconnect

7

Disconnect antenna cable on E-network compensator (A28/3)

8

Loosen sheet metal screws (2)

9

Remove E-network compensator (A28/3)

10

Install in the reverse order

Commercially available tools

Number

Designation

WH58.30-Z-1012-09A

Quiescent current retention unit

Referenced documents