P82.62-2931-09
Shown on vehicle with panoramic glass roof with top sliding roof, code 413
1 Electrical connectors
2 Electrical connector
3 Electrical connector
4 Antenna cable connectors
5 Nuts
A2/93 Roof antenna module
Modification notes
26.7.06 | Disconnect/connect ground line for battery and carry out basic programming removed | Steps 1 and 8 |
| Remove/install | ||
| Notes on avoiding damage to electronic components due to electrostatic discharge | ||
1 | Remove headliner | With panoramic glass roof with top sliding roof, code 413. | |
With glass sliding roof, code 414. | |||
2 | Disconnect electrical connectors (1) and electrical connector (2, 3) | Unclip cable tie if present. | |
3 | Disconnect antenna cable (4) connectors | Unclip cable tie if present. | |
4 | Unscrew nuts (5). | ||
5 | Release roof antenna module (A2/93) at the two tabs (arrow) and remove | Long wedge | |
6 | Install in the reverse order |
Long wedge
115 589 03 59 00
Referenced documents
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar6830p4300rt Remove/install headliner
- ar6830p4300rta Remove/install headliner