ar8262p8105ea

Removing and installing automatic antenna

Type ar · topic 82.62 · version 0108 · 1999-11-25

Applies to: MODEL 129 MODEL 202.01 /02 /12 with CODE (531) Automatic antenna with CODE (538) Automatic antenna and front speakers -without radio- with CODE (491) USA version MODEL 210.0 /6 with CODE (491) USA version

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.62 Loudspeakers, amplifiers, antennas — Series 129 · Series 202 (models 01*, 02*, 12*) · Series 210 (models 0**, 6**)

EinPAS 31 Communication/information/entertainment › 31.80 Antenna/antenna amplifier › 31.80.14 Transmitter/receiver — Series 129 · Series 202 (models 01*, 02*, 12*) · Series 210 (models 0**, 6**)

AR82.62-P-8105EA

Removing and installing automatic antenna

9.7.93

MODEL 129

MODEL 202.01 /02 /12
with CODE (531) Automatic antenna
with CODE (538) Automatic antenna and front speakers -without radio-
with CODE (491) USA version

MODEL 210.0 /6 with CODE (491) USA version

Removing and installing automatic antenna

P82.60-0003-06

Illustrated on model 202

77 Screw

78 Screw

79 Top part of seal

80 Bottom part of seal

81 RF cable

82 Electrical connection

M11 Automatic antenna

Removal, installation

1.1

Remove receiver and amplifier

Model 129

AR82.62-P-7721A

2

Disconnect ground lead from battery

AR54.10-P-0003A

3

Unscrew screw (77)

4

Unscrew screw (78)

5

Remove automatic antenna (M11) toward bottom

Model 202 with antenna splitter

Model 210 without antenna splitter

The antenna head is held in the fender by a rubber grommet.

6

Disconnect electrical connector (82)

7

Unscrew RF lead (81)

8

Install in opposite order

Referenced documents