Remove/install loudspeakers in rear doors

AR82.62-P-7874RT

Remove/install loudspeakers in rear doors

20.6.06



Removing



The radio must be switched off

1

Remove door lining (1) on the left and right rear doors

 Do not disconnect power window connector yet.

AR72.12-P-1010RT

2

Move crank window completely upwards, disconnect power window connector on power window motor and place door lining (1) aside

 Treat ribbon cable carefully to prevent damage.

3

Disconnect connectors (2) from left rear door speaker (H4/3) and from right rear door speaker (H4/4)

4

Drill out rivets (3)

Cordless drill/driver

*WH58.30-Z-1007-20A

5

Pry off left rear door speaker (H4/3) and right rear door speaker (H4/4) from the door module using a long wedge and remove

 Pry off with care, as otherwise the sealing bands on the flange of the left rear door speaker (H4/3) and the right rear door speaker (H4/4) can be damaged

 Long wedge

*115589035900

6

Use a wet/dry vacuum cleaner to remove any rivet residues that dropped into the door skin when drilling out the rivets (3)

 Remaining rivet material must be completely removed, otherwise this can cause corrosion damage.

Wet/dry vacuum cleaner

*WE58.40-Z-1005-03A



Install

7

Insert left rear door speaker (H4/3) and right rear door speaker (H4/4) into the door module, apply rivets (3)

 PowerBird blind rivet tool

*WE58.40-Z-1003-14A

 Use aluminum/steel hollow rivets, dia. 4.8 x 15 mm

8

Plug in connector (2)

9

Install door lining (1) on the left and right rear door

AR72.12-P-1010RT

Number

Designation

WH58.30-Z-1007-20A

Cordless drill/driver

WE58.40-Z-1005-03A

Wet/dry vacuum cleaner

WE58.40-Z-1003-14A

Blind rivet tool