ar8262p7833rt

Removing and installing loudspeaker in instrument panel

Type ar · topic 82.62 · version 0100 · 2005-05-31

Applies to: MODELS 251 with CODE (810) Sound system

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.62 Loudspeakers, amplifiers, antennas — Series 251

EinPAS 31 Communication/information/entertainment › 31.75 Audio playback/audio output › 31.75.16 Speaker — Series 251

AR82.62-P-7833RT

Removing and installing loudspeaker in instrument panel

24.2.05

MODELS 251 with CODE (810) Sound system

Removing and installing loudspeaker in instrument panel

P82.62-2911-06

Shown on vehicles with Parktronic system (PTS), code 220

1 Center cockpit speaker (centerfill) cover

2 Electrical connectors

3 Bolts

4 Clips

5 Retaining lug

H4/27 Center cockpit speaker (centerfill)

Remove/Install

1

Switch off ignition and remove the transmitter key from the EIS [EZS] control unit

On vehicles with Keyless Go, code 889: Press Keyless Go start/stop button repeatedly until the ignition is switched off. Remove transmitter key from vehicle and store it in a location beyond its transmission range (at least 2 m).

Ensure that the radio is switched off.

2

Carefully unlatch center cockpit speaker (centerfill) cover (1) from the rear edge (arrow) and pull upward out of the installation opening

Protect instrument panel from being scratched.

Installation: Insert center cockpit speaker (centerfill) cover (1) first with the two front retaining lugs (5), then engage the clips (4).

Long wedge

*115589035900

3

Separate the electrical connectors (2)

4

Unscrew screws (3) and detach center cockpit speaker (centerfill) (H4/27)

5

Install in the reverse order

Removing and installing loudspeaker in instrument panel

Long wedge

115 589 03 59 00