P82.62-2784-09
1 Front section, covering, rain/light sensor
2 Rear section, covering, rain/light sensor
3 Catch lugs
B25/6 Sound amplifier microphone
B25/6x1 Sound amplifier microphone connector
| Remove/Install | ||
| Notes on avoiding damage to electronic components due to electrostatic discharge | All models | |
1 | Switch off ignition and remove the transmitter key from the EIS [EZS] control unit | On vehicles with Keyless Go, code 889: Press Keyless Go start/stop button repeatedly until the ignition is switched off. Remove transmitter key from vehicle and store it in a location beyond its transmission range (at least 2 m). | |
2 | Unclip front section, covering, rain/light sensor (1) toward the front (arrow A) | ||
3 | Unclip rear section, covering, rain/light sensor (2) downward (arrow B) | ||
4 | Disconnect sound amplifier microphone connector (B25/6x1) | ||
5 | Remove sound amplifier microphone (B25/6) from the rain/light sensor covering rear section (2) | Carefully press both tabs (3) away from each other to remove the sound amplifier microphone (B25/6). | |
6 | Install in the reverse order | ||
7 | Check sound amplifier microphone (B25/6) |
Referenced documents
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar8262p1110rt Check microphone for sound amplifier