ar8262p0004eq

Remove/install NFC antenna

Type ar · topic 82.62 · version 0101 · 2019-08-12

Applies to: Model 253 as of model year 2020 with code 897 (Front wireless telephone charging) Model 253 as of model year 2020 with code 899 (Multifunction telephony) Model 293 with code 897 (Front wireless telephone charging) Model 293 with code 899 (Multifunction telephony)

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.62 Loudspeakers, amplifiers, antennas — Series 253 · Series 293

EinPAS 31 Communication/information/entertainment › 31.80 Antenna/antenna amplifier › 31.80.14 Transmitter/receiver — Series 253 · Series 293

AR82.62-P-0004EQ

Remove/install NFC antenna

12.08.2019

Model

253

as of model year 2020

with code 897 (Front wireless telephone charging)

Model

253

as of model year 2020

with code 899 (Multifunction telephony)

Model

293

with code 897 (Front wireless telephone charging)

Model

293

with code 899 (Multifunction telephony)

Remove/install NFC antenna

Shown on model 253

1

Center console cover

3

Electrical line

4

Catch hook

5

Stowage compartment

A2/156

Near Field Communication antenna

P82.62-A000-06

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove stowage compartment (5) from cover of center console (1).


Model 293
with code 897 (Front wireless telephone charging)
Model 293
with code 899 (Multifunction telephony)

AR68.20-P-0901EQ

Model 253
as of model year 2020
with code 897 (Front wireless telephone charging)
Model 253
as of model year 2020
with code 899 (Multifunction telephony)

AR68.20-P-0901LWM

2

Unclip cap of stowage compartment (5) towards rear, in the opposite direction of travel, from stowage compartment (5) and remove.


Do not use sharp-edged tools.
Otherwise, the cap may be damaged.

Installation:
Check for correct positioning of the cap before clipping it into place.
Otherwise, the fasteners and the cap may be damaged.

3

Disconnect electrical connector from mobile phone cradle control unit and expose electric line (3).

4

Release catch hooks (4) and guide near-field communication antenna (A2/156) with electric line (3) outwards and remove.

5

Install in the reverse order.

Referenced documents