ar8261p7482b

Removing and installing electronic compass (APS)

Type ar · topic 82.61 · version 0100 · 1997-01-22

Applies to: MODEL 210.0 as of 1.6.96 with CODE (351) Auto pilot system (APS)

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.61 Auto Pilot System (APS), Audio 30 APS — Series 210 (models 0**)

EinPAS 31 Communication/information/entertainment › 31.55 Navigation › 31.55.12 Sensor/switch/wiring harness — Series 210 (models 0**)

AR82.61-P-7482B

Removing and installing electronic compass (APS)

22.10.96

MODEL 210.0 as of 1.6.96 with CODE (351) Auto pilot system (APS)

Removing and installing electronic compass (APS)

P82.61-0324-06

B26 Electronic compass

B26x1 Electronic compass connector

6 Bracket

8 Spreading rivet

Removal, installation

1

Remove rear shelf

AR68.30-P-4580F

2

Remove spreading rivet (8)

Remove pin from trunk

3

Disconnect electric compass connector (B26x1)

4

Unclip bracket (6) with electronic compass (B26) from rear shelf

5

Unclip electronic compass (B26) from bracket (6)

When installing ensure that electronic compass (B26) is positioned tightly in bracket (6). If necessary glue on felt strip

6

Reinstall in opposite order

Referenced documents