P82.60-9713-09
Shown with code B01 (48V technology) |
1 | Bolts | 5 | Bracket | |
2 | Bracket | 6 | Electrical connectors | |
3 | Nut | 7 | Bolts | |
4 | Screw | A90/4 | Tuner unit |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage to optical fibers during repair work | ||
| Remove/install | ||
1 | Carry out initial startup of tuner unit (A90/4) | When replacing tuner unit (A90/4). | |
| |||
2 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
3 | Remove trunk recess cover | ||
4 | Remove on-board electrical system battery | Model 238.4 | |
5 | Remove screws (1) and lift up bracket (2) far enough to gain access to the nut (3) under the bracket (2) | Model 238.4 | |
6 | Remove parking system control unit from bracket (5) | Model 238.4 | |
The electrical connectors on the parking system control unit must not be disconnected. | |||
7 | Unscrew nuts (3) | ||
8 | Remove bolts (4) | ||
9 | Lift up bracket (5) with tuner unit (A90/4) | ||
10 | Disconnect electrical connectors (6) and cover fiber-optic cables | ||
11 | Remove screw/bolts (7) | ||
12 | Remove tuner unit (A90/4) downwards from bracket (5) | ||
13 | Install in the reverse order |
Referenced documents
- ad0000p200006lwo Connect/disconnect diagnostic unit
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ah8260p000105ak Notes on avoiding damage to optical fibers during repair work
- ar5410p0009lwk Remove/install on-board electrical system battery
- ar5465p0018lwp Remove/install parking system control unit
- ar6830p4600lwo Remove paneling in trunk