ar8260p2002ew

Remove/install tuner unit

Type ar · topic 82.60 · version 0101 · 2019-08-12

Applies to: Model 212.0 as of model year 2015 up to model year 2016 with code 536 (Sirius satellite radio complete system) with code 806 (Model year 2016) Model 212.0 as of model year 2016 with code 536 (Sirius satellite radio complete system)

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.60 Radio, audio, video systems — Series 212 (models 0**)

EinPAS 31 Communication/information/entertainment › 31.65 Radio › 31.65.11 Control unit/relay — Series 212 (models 0**)

EinPAS 31 Communication/information/entertainment › 31.66 TV › 31.66.11 Control unit/relay — Series 212 (models 0**)

AR82.60-P-2002EW

Remove/install tuner unit

12.08.2019

Model

212.0

as of model year 2015 up to model year 2016

with code 536 (Sirius satellite radio complete system)

with code 806 (Model year 2016)

Model

212.0

as of model year 2016

with code 536 (Sirius satellite radio complete system)

Remove/install tuner unit

Shown with code 872 (Seat heater in rear passenger compartment)

1

Right trunk trim

2

Nuts

3

Bracket

4

Electrical connector

5

Electrical connection with fiber optic cable

A90/4

Tuner unit

P82.60-9501-06

Topical note

Notes on avoiding damage to optical fibers during repair work

AH82.60-P-0001-05AK

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Carry out initial startup of tuner unit (A90/4)

When replacing tuner unit (A90/4).

AD00.00-P-2000-04A

2

Switch off ignition and store transmitter key outside of transmission range (min. 2 m)

3

Remove right luggage compartment lining (1)

AR68.30-P-4600EW

4

Unscrew nuts (2)

5

Remove holder (3) with tuner unit (A90/4) and place to one side with attached electric lines

Installation: Ensure that electrical wiring harnesses are routed correctly.

6

Disconnect electrical connection (4)

7

Disconnect electrical connector with optical fiber (5)

8

Cover up connector of electrical connection with optical fiber (5) and equipment connection on tuner unit (A90/4)

9

Remove tuner unit (A90/4) from holder (3)

10

Install in the reverse order

Referenced documents