1 | Electrical connectors |
2 | Nut |
3 | Bracket |
A90/4 | Tuner unit |
P82.60-9730-06
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage to optical fibers during repair work | ||
| Remove/install | ||
1 | Carry out initial startup of tuner unit (A90/4) | When replacing tuner unit (A90/4). | |
| |||
2 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
3 | Open load compartment trim on right and remove damping behind it | ||
4 | Disconnect electrical connectors (1) and cover fiber-optic cables | The number of electrical connectors (1) varies depending on the vehicle equipment. | |
5 | Unscrew nuts (2) | ||
6 | Remove bracket (3) with tuner unit (A90/4) | ||
7 | Remove tuner unit (A90/4) from bracket (3) | When replacing tuner unit (A90/4). | |
8 | Install in the reverse order |
Referenced documents
- ad0000p200004a Connect STAR DIAGNOSIS and read out fault memory
- ad0000p200004a
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ah8260p000105ak Notes on avoiding damage to optical fibers during repair work