Removing and installing audio/video controller control module

AR82.60-P-2000H

Removing and installing audio/video controller control module

09.01.2020

Model

240

1

Screw

2

Antenna lines

3

Electrical connector

4

Bolts

5

Bracket

A2/89

Active TV antenna splitter

N66/3

Audio/video controller control unit

 

Remove/install

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect battery ground line

AR54.10-P-0003H

Topical note

Notes on battery

AH54.10-P-0001-01A

2

Remove central audio component

AR82.60-P-7605H

3

Release and disconnect antenna lines (2) and electrical connector (3) from active TV antenna splitter (A2/89)

4

Release and disconnect electrical connectors from audio/video controller control unit (N66/3)

 Also the lower connectors on the audio/video controller control unit (N66/3).

5

Unscrew screw (1) and remove holder (5) with audio/video controller control unit (N66/3)

6

Unscrew screws (4) on left and right of holder (5)

7

Remove audio/video controller control unit (N66/3) from holder (5)

8

Install in the reverse order