Remove/install washer fluid reservoir of windshield washer system

AR82.35-Y-6000A

Remove/install washer fluid reservoir of windshield washer system

13.11.2019

Model

400.204/207/212/216/231/241/243/262/281 with body 400.899

Windshield Washer Reservoir Removal Procedure

1

Windshield washer reservoir

2

Windshield washer reservoir hose connection

3

Wind shield washer reservoir motor

2

Windshield washer reservoir hose connection

4

Wind shield washer reservoir motor mounting bush

Windshield Washer Reservoir Refitment Procedure

5

Screws

 

Remove/install

1

Open the front lid and support using stay rod

2

Remove the front grill

3

Remove windshield washer reservoir (1) mounted on the front side from cabin front wall

 Installation: Avoid using air gun. Use only recommended torque.

 Windshield washer reservoir to cabin

*BA60.80-Y-1003-01A

4

Disconnect the electrical connector of windshield washer reservoir (1)

5

Remove wind shield washer reservoir hose connection (2) from the reservoir motor

6

Pull wind shield washer reservoir motor (3) from windshield washer reservoir tank

7

If required, pull out the wind shield washer reservoir motor mounting bush (4)

8

Remove wind shield washer hose (2) mounting clip from front wall

9

Install in the reverse order

 Cabin Torque Chart

Number

Designation

Model 400.204/207/212/216/231/241/243/262/281 with body 400.899

BA60.80-Y-1003-01A

Windshield washer reservoir to cabin

Nm

35