W82.35-1008-09
Shown on vehicle with code I4B (4x4 wheel configuration) |
1 | Washer fluid reservoir | 5 | Cover | 9 | Electrical wiring harness | ||
2 | Cover (only for vehicles with code I4B (4x4 wheel configuration)) | 6 | Dirt trap | 10 | Filler neck | ||
3 | Strut (only for vehicles with code I4B (4x4 wheel configuration)) | 7 | Bracket | ||||
4 | Reinforcement | 8 | Hose |
Danger ! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
Danger ! | Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin. | Wear protective clothing and tight-fitting safety glasses. No open flames, fire or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leakfree in safely closed original containers and out of the reach of children. | |
| Notes on tilting the cab | ||
| Remove/install | ||
1 | Open maintenance flap | ||
2 | Tilt cab | ||
3 | Remove strut (3) with reinforcement (4) | Only for vehicles with code I4B (4x4 wheel configuration) | |
4 | Remove cover (2) | Only for vehicles with code I4B (4x4 wheel configuration) | |
5 | Remove cover (5) | ||
6 | Remove mud flap (6) | ||
7 | Expose and disconnect hose (8) | There may be several hoses (8) depending on equipment installed. | |
8 | Expose electrical wiring harness (9) and disconnect electrical connector to windshield washer fluid pump (M16) | ||
9 | Disconnect electrical connector on headlamp washer fluid pump (M17) | Only for vehicles with code F46 (Headlamp cleaning system) | |
10 | Remove bracket (7) | ||
11 | Pull washer fluid reservoir (1) out of filler neck (10) and remove | ||
12 | Remove windshield washer fluid pump (M16) | Only when replacing the washer fluid reservoir (1). | |
13 | Remove headlamp washer fluid pump (M17) | Only for vehicles with code F46 (Headlamp cleaning system) | |
14 | Install in the reverse order | ||
15 | Inspect fluid level of windshield washer system and adjust to correct level | ||
| |||
16 | Carry out function check | ||
|
Referenced documents
- ah6080n000301a Notes on tilting the cab
- ap8230w8252h Windshield wipers, windshield washer system and headlamp cleaning system - function check
- ap8235w8210a Windshield washer system - inspect fluid level, adjust to correct level
- as6080z000101a Risk of injury caused by body parts being pinched or crushed as cab is tilted
- as8235z000101a Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical