ar8235s6002e

Remove/install windshield washer system pump

Type ar · topic 82.35 · version 0101 · 2016-01-21

Applies to: Model 447, 448

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.35 Windshield washing system — Series 447 · Series 448

EinPAS 36 Visibility › 36.30 Wiping/washing › 36.30.41 Pump/container/heat exchanger — Series 447 · Series 448

AR82.35-S-6002E

Remove/install windshield washer system pump

21.12.15

Model

447, 448

Remove/install windshield washer system pump

Shown with CODE W78 (Window in liftgate/hinged rear door with wiper/washer system)

1

Electrical connector

2

Hose

M5/4

Windshield washer system pump

S82.35-4532-05

Remove/install

1

Detach fender liner in left front fender until washer fluid system pump (M5/4) is accessible

AR88.10-S-1300E

2

Disconnect electrical connector (1)

3

Remove hoses (2) from windshield washer system pump (M5/4)

Collect washer fluid which flows out.

Installation: Observe assignment of hoses (2).

4

Unclip and remove windshield washer system pump (M5/4)

Installation: Replace seal.

5

Install in the reverse order

Check

6

Check that windshield washer system is functioning correctly

AP82.30-S-8252E

Referenced documents