ar8235s6000b

Remove/install washer fluid reservoir of windshield washer system

Type ar · topic 82.35 · version 0103 · 2009-12-02

Applies to: MODEL 638.244 with ENGINE 104.900

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.35 Windshield washing system — Series 638 (models 244)

EinPAS 36 Visibility › 36.30 Wiping/washing › 36.30.41 Pump/container/heat exchanger — Series 638 (models 244)

Also applies to engines/gearboxes: 104 900

AR82.35-S-6000B

Remove/install washer fluid reservoir of windshield washer system

26.11.09

MODEL 638.244 with ENGINE 104.900

Remove/install washer fluid reservoir of windshield washer system

S82.35-2500-06

1 Container

2 Washer fluid pumps

3 Nut

Remove/install

1

Remove screw/bolt for fastening container

The screw/bolt is at the left on the upper edge of the container.

*BA82.35-N-1002-01B

2.1

Remove washer fluid reservoir of headlamp washer system

Only with code F46: Additional reservoir for headlamp washer system.

3

Unplug connector at washer fluid pumps (2)

Installation: Note correct assignment of connectors.

4

Remove nut (3)

*BA82.35-N-1001-01B

5

Remove washer fluid pumps (2) and unplug washer fluid hoses

Collect washer fluid.

Installation: Note correct assignment of washer fluid hoses.

6

Take out washer fluid reservoir (1)

7

Install in the reverse order

Windshield washer system

Number

Designation

Model
638

BA82.35-N-1001-01B

Nut, container of windshield washer system fluid to body

Nm

8

BA82.35-N-1002-01B

Bolt, container of windshield washer system fluid to body

Nm

8