ar8235p6970rt

Remove/install windshield washer nozzle

Type ar · topic 82.35 · version 0100 · 2005-06-23

Applies to: MODEL 251

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.35 Windshield washing system — Series 251

EinPAS 36 Visibility › 36.30 Wiping/washing › 36.30.13 Line/hose/valve — Series 251

AR82.35-P-6970RT

Remove/install windshield washer nozzle

24.3.05

MODEL 251

Remove/install windshield washer nozzle

P82.35-2450-06

1 Catch hook

2 Windshield washer nozzle

3 Washer fluid hose

4 Electrical connector

Remove/install

1

Open engine hood and move to upright position

AR88.40-P-1000RT

2

Remove air intake duct under the hood

AR83.25-P-1407RT

3

Detach washer fluid hose (3) from windshield washer nozzle (2)

Risk of breakage.

4

Unclip windshield washer nozzle (2) from catch hook (1) of air inlet grate (arrow)

5

Unplug electrical connector (4) and disconnect windshield washer nozzle (2)

6

Install in the reverse order

7

Fill washer fluid reservoir

Windshield washer system - inspect fluid level, adjust to correct level

AP82.35-P-8210RT

8

Carry out function check of the windshield wipers and the windshield washer system

Windshield wipers, windshield washer system and headlamp cleaning system - function check

AP82.30-P-8252RT

9

Check adjustment of windshield washer nozzle (2), adjust if necessary.

Check setting of windshield washer system spray nozzles

AP82.35-P-8252-01RT

Referenced documents