AR82.35-P-6005RT | Remove/install the fluid level sensor for the windshield washer system | 22.3.05 |
MODEL 251
P82.35-2442-06
Shown on vehicle with headlamp cleaning system
1 Electrical connector
2 Washing water reservoir
3 Seal
S42 Windshield washer fluid level indicator switch
| Remove/install | ||
1 | Remove front section of fender liner in front fender | Front section of fender liner in right front fender | |
2 | Press clips (arrows) inward and disconnect electrical connector (1) | ||
3 | Pry windshield washer fluid level indicator switch (S42) off the washer fluid reservoir (2) using long wedge | Collect washer fluid which flows out. | |
Installation: Replace gasket (3) of windshield washer fluid level indicator switch (S42) on washer fluid reservoir (2). | |||
Long wedge | |||
4 | Install in the reverse order | ||
5 | Fill washer fluid reservoir (2) | ||
| Windshield washer system - inspect fluid level, adjust to correct level |
Long wedge
115 589 03 59 00
Referenced documents
- ap8235p8210rt Windshield washer system - inspect fluid level, adjust to correct level
- ar8810p1310rt Remove/install fender liner front section in front fender