Remove/install headlamp cleaning system pump · ar8235p6003rt · Mercedes-Benz WIS

AR82.35-P-6003RT

Remove/install headlamp cleaning system pump

2.2.05

MODELS 251 with CODE (600) Headlamp cleaning system

P82.35-2441-09

1 Washing water reservoir

2 Securing clamp

3 Washer fluid hose

4 Plug

5 Seal

6 Electrical connector

M5/2 HCS [SRA] pump

 	Remove/install
1	Remove front section of fender liner in front fender	 Front section of fender liner in right front fender	AR88.10-P-1310RT
		 Wheel does not need to be removed.
2	Compress safety clamp (2) and detach washer fluid hose (3) from the HCS pump (M5/2)	 Collect escaping washer fluid with a suitable reservoir.
3	Remove HCS pump (M5/2) upward (arrow) out of the washer fluid reservoir (1), seal off washer fluid reservoir (1) using stop plug (4)	 Collect escaping washer fluid with a suitable reservoir.
		 Installation: Check seal (5), replace if necessary.
		 Note correct installation position.
		 Mounting wedge	*110589035900
		 Set of plugs	*129589009100
4	Disconnect electrical connector (6) and remove HCS pump (M5/2)
5	Install in the reverse order
6	Fill washer fluid reservoir (1)
	Check windshield washing unit fluid level, top up if necessary		AP82.35-P-8210RT
7	Carry out function check of the windshield wipers and the windshield washer system

129 589 00 91 00

Set of plugs

Mounting wedge

110 589 03 59 00

ap8235p8210rt Windshield washer system - inspect fluid level, adjust to correct level
ar8810p1310rt Remove/install fender liner front section in front fender