ar8235p6003ff

Remove/install headlamp cleaning system pump

Type ar · topic 82.35 · version 0101 · 2007-01-22

Applies to: MODEL 454.0 with CODE (22Y) Headlamp cleaning system

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.35 Windshield washing system — Series 454 (models 0**)

EinPAS 36 Visibility › 36.30 Wiping/washing › 36.30.41 Pump/container/heat exchanger — Series 454 (models 0**)

AR82.35-P-6003FF

Remove/install headlamp cleaning system pump

8.1.07

MODEL 454.0 with CODE (22Y) Headlamp cleaning system

Remove/install headlamp cleaning system pump

P82.35-2306-04

1 Connector

2 Washing water reservoir

M5/2 HCS [SRA] pump

Remove/install

1

Suction off window washer fluid in washer fluid reservoir (2)

2

Remove front CBS

AR88.00-P-1010FF

3

Detach plug (1) from HCS [SRA] pump (M5/2)

4

Tilt HCS pump (M5/2) outwards (arrow) and remove from washer fluid reservoir (2)

Collect window washer fluid which flows out using a suitable container.

Installation: Replace sealing ring of HCS pump (M5/2).

5

Install in the reverse order

6

Fill washer fluid reservoir (2)

Windshield washer system - inspect fluid level, adjust to correct level

AP82.35-P-8210FF

7

Perform tightness check of washer fluid reservoir (2)

8

Check headlamp cleaning system for proper function

Referenced documents