Remove/install windshield washer system pump

AR82.35-P-6002RT

Remove/install windshield washer system pump

2.2.05

 

Remove/install

1

Remove front section of fender liner in front fender

 Front section of fender liner in right front fender

AR88.10-P-1310RT

 Wheel does not need to be removed.

2

Remove windshield washer fluid pump (M5/1) upward (arrow) out of the washer fluid reservoir (1) and seal off using stop plug (4)

 Collect escaping washer fluid with a suitable reservoir.

 Installation: Check seal (5), replace if necessary.

 Note correct installation position.

 Mounting wedge

*110589035900

 Set of plugs

*129589009100

3

Disconnect electric connector (2)

4

Detach washer fluid hoses (3) from the windshield washer fluid pump (M5/1)

5

Remove windshield washer water pump (M5/1)

6

Install in the reverse order

7

Fill washer fluid reservoir (1)



Check windshield washing unit fluid level, top up if necessary

AP82.35-P-8210RT

8

Carry out function check of the windshield wipers and the windshield washer system