Removing and installing washer fluid reservoir of windshield washer system

AR82.35-P-6000RT

Removing and installing washer fluid reservoir of windshield washer system

13.5.05

 

Remove/install

1

Remove front bumper

AR88.20-P-2000RT

2

Remove headlamp on the right-hand side of vehicle

AR82.10-P-4730RT

3

Remove bolts (2) and bolt (3) and place compressor with bracket (4) outside the working area

 Do not disconnect electrical connectors.



*BA32.22-P-1005-03C



*BA32.22-P-1006-03C

4.1

Remove bolt (9) and pull out the telescopic nozzle (5) towards the front

 Only for vehicles with headlamp cleaning system, code 600.

 Pull out the telescopic nozzle (5) towards the front until the washer fluid reservoir (1) can be removed.

5

Remove windshield washer fluid pump (M5/1) from the washer fluid reservoir (1)

 Collect escaping washer fluid in a suitable container

6

Disconnect plug and socket connection (6)

7.1

Remove HCS [SRA] pump (M5/2)

 Only for vehicles with headlamp cleaning system, code 600.

 Collect escaping washer fluid in a suitable container

8

Remove bolts (7) and bolt (8) and remove washer fluid reservoir (1) downwards

9

Install in the reverse order

10

Fill washer fluid reservoir (1)



Windshield washer system - inspect fluid level, adjust to correct level

AP82.35-P-8210RT

11

Check windshield washer system for proper function

 Switch on ignition and check the function of the pump by actuating the combination switch. A sufficient quantity of washer fluid must spray out of the spray nozzles.

Number

Designation

Model 251 with all-round level control system
(code 489)

Model 251 without all-round level control system
(code 489)

BA32.22-P-1005-03C

Bolt, compressor bracket to crossmember

Nm

20

20

BA32.22-P-1006-03C

Bolt of compressor bracket to front end assembly

Nm

20

20