ar8235p6000rr

Removing and installing washer fluid reservoir of windshield washer system

Type ar · topic 82.35 · version 0100 · 2003-12-04

Applies to: Models 452.3 /4

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.35 Windshield washing system — Series 452 (models 3**, 4**)

EinPAS 36 Visibility › 36.30 Wiping/washing › 36.30.41 Pump/container/heat exchanger — Series 452 (models 3**, 4**)

AR82.35-P-6000RR

Removing and installing washer fluid reservoir of windshield washer system

17.6.03

Models 452.3 /4

Removing and installing washer fluid reservoir of windshield washer system

P82.35-2276-06

1 Washing water reservoir

2 Connector

3 Water hose

4 Nut

5 Nuts

6 Bracket

M5/1 Windshield washer fluid pump

Remove/Install

1

Remove CBS Front

AR88.00-P-1010RR

2

Disconnect plug (2) from windshield washer fluid pump (M5/1)

Pay attention to catch lugs.

3

Detach water hose (3) from windshield washer fluid pump (M5/1) and seal connection with a suitable piece of hose

Collect window washer fluid which runs out in a suitable container.

4

Pull water hose (3) out of brackets

5

Unscrew nut (4) on wheelhouse lining

6

Unscrew nuts (5).

7

Loosen washer fluid reservoir (1) from bracket (6) and remove

Fold wheelhouse lining to one side.

8

Install in the reverse order

Referenced documents