ar8235p6000ff

Remove/install washer fluid reservoir of windshield washer system

Type ar · topic 82.35 · version 0101 · 2007-01-22

Applies to: MODEL 454.0

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.35 Windshield washing system — Series 454 (models 0**)

EinPAS 36 Visibility › 36.30 Wiping/washing › 36.30.41 Pump/container/heat exchanger — Series 454 (models 0**)

AR82.35-P-6000FF

Remove/install washer fluid reservoir of windshield washer system

8.1.07

MODEL 454.0

Remove/install washer fluid reservoir of windshield washer system

P82.35-2307-09

Shown on vehicle with code (22Y) Headlamp cleaning system

1 Filler neck

2 Bracket

3 Washing water reservoir

4 Electrical line

M5/1 Windshield washer fluid pump

M5/2 HCS [SRA] pump (for code (22Y) Headlamp cleaning system)

5 Clip

6 Clip

7 Electrical connector

8 Bolt

Remove/install

1

Suction off window washer fluid in washer fluid reservoir (3)

2

Release filler neck (1) from bracket (2) and pull out of washer fluid reservoir (3)

Installation: Replace seal ring on filler neck (1).

3

Disconnect electrical line (4) from washer fluid reservoir (3)

4

Remove front CBS

AR88.00-P-1010FF

5

Remove clips (5)

6

Remove clip (6) from washer fluid reservoir (3)

7

Detach electrical connector (7) from HCS [SRA] pump (M5/2)

On vehicles with code (22Y) Headlamp cleaning system

8

Remove bolts (8)

9

Detach hoses of windshield washer fluid pump (M5/1) from guides in washer fluid reservoir (3)

10

Push washer fluid reservoir (3) upwards and to the right, unhook, and guide downwards until windshield washer fluid pump (M5/1) is accessible

11

Remove hoses and electrical connector from windshield washer fluid pump (M5/1)

Collect window washer fluid which flows out in a suitable container.

12

Remove washer fluid reservoir (3) from below

13

Tilt windshield washer fluid pump (M5/1) and HCS [SRA] pump (M5/2) outwards (arrows) and remove from washer fluid reservoir (3)

Only when replacing washer fluid reservoir (3) or windshield washer fluid pump (M5/1) or HCS [SRA] pump (M5/2) with code (22Y) Headlamp cleaning system.

Collect window washer fluid which flows out in a suitable container.

Installation: Replace seal rings of windshield washer fluid pump (M5/1) and HCS [SRA] pump (M5/2) with code (22Y) Headlamp cleaning system.

14

Install in the reverse order

15

Fill washer fluid reservoir (3)

Windshield washer system - inspect fluid level, adjust to correct level

AP82.35-P-8210FF

16

Perform tightness check of washer fluid reservoir (3)

17

Perform function check of windshield washer system

18

Check headlamp cleaning system for proper function

On vehicles with code (22Y) Headlamp cleaning system

Referenced documents