AR82.35-D-6000NB | Remove/install washer fluid reservoir of windshield washer system | 23.8.11 |
MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada
MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA
MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico
D82.35-0004-06
1 Windshield washer system washer fluid reservoir
2 Nut
3 Screw
4 Rubber bushing
5 Electrical connector
6 Windshield washer fluid pump
| Remove/install | ||
1 | Open engine hood | ||
2 | Remove nut (2) and remove windshield washer system washer fluid reservoir (1) | Installation: Ensure that windshield washer system washer fluid reservoir (1) is seated correctly in rubber mounts (4) and check screw/bolt (3) for tight seating. | |
3 | Disconnect electrical connector (5) at window washer fluid pump (6) | ||
4 | Open cap and empty windshield washer system washer fluid reservoir (1) via filler opening | Use a suitable receptacle. | |
5 | Remove window washer fluid pump (6) | Installation: Check rubber seal, replace if necessary. | |
6 | Remove windshield washer system washer fluid reservoir (1) | ||
7 | Install in the reverse order | ||
8 | Fill windshield washer system washer fluid reservoir (1) | ||
Windshield washer system - inspect fluid level, adjust to correct level | |||
| Checking | ||
9 | Check windshield wiper system for proper function, if necessary adjust spray nozzles | ||
Windshield wipers, windshield washer system and headlamp cleaning system - function check |
Referenced documents
- ap8230d8252a Windshield wipers, windshield washer system and headlamp cleaning system - function check
- ap8235d8210a Windshield washer system - inspect fluid level, adjust to correct level