1 | Washer fluid reservoir |
2 | Electrical line |
3 | Hose |
4 | Pump |
5 | Air intake pipe |
6 | Combined nut/washer |
7 | Grommets |
8 | Electrical connector |
9 | Latch |
10 | Stud bolt |
D82.35-0008-06
| Remove/install | ||
1 | Unclip electrical line (2) from washer fluid reservoir (1) | ||
2 | Detach hose (3) from washer fluid reservoir (1) | ||
3 | Detach air intake pipe (5) from wheel well | ||
4 | Unscrew latch (9) and disconnect electrical connector (8) from pump (4) | ||
5 | Unscrew nut-and-washer assembly (6) and pull washer fluid reservoir (1) out of grommets (7) | Installation: Check washer fluid reservoir (1) is correctly seated in grommets (7) and that the stud bolt (10) is tightly fitted. | |
6 | Pull pump (4) out of washer fluid reservoir (1) and collect escaping washer fluid in suitable container | ||
7 | Remove washer fluid reservoir (1) | ||
8 | Install in the reverse order | ||
| Check | ||
9 | Correct fluid level of windshield washer system | ||
| |||
10 | Check that windshield washer system is functioning correctly | ||
|
Referenced documents
- ap8230d8252r Windshield wipers, windshield washer system and headlamp cleaning system - function check
- ap8235d8210r Windshield washer system - inspect fluid level, adjust to correct level