ar8230w6400a

Removing and installing wiper system

Type ar · topic 82.30 · version 0102 · 1997-02-19

Applies to: BODY 942.899

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.30 Windshield wipers — Series 942 (models 899)

EinPAS 36 Visibility › 36.30 Wiping/washing › 36.30.50 Windshield wiper system — Series 942 (models 899)

AR82.30-W-6400A

Removing and installing wiper system

22.4.96

BODY 942.899

Removing and installing wiper system

W82.30-0001-06

1 Cover
2 Wiper bearing shaft
3 Water connection for windshield washer

4 Nut
5 Wiper arm
6 Caps
7 Handle
8 Screw
9 Linkage lever
10 Wiper motor shaft

11 Paneling

Removing and installing wiper system

W82.30-0002-06

2 Wiper bearing shaft

12 Bearing bracket

13 Linkage cross member

14 Rear water connection

15 Screw

16 Washer

Removal, installation

1

Remove front flap

AR88.60-W-2901A

2

Move wiper system to end position

The wiper system must be switched off and have completed its return motion.

3

Pivot up cover (1) on wiper arm above windshield wiper bearing shaft (2)

4

Pull front water connection for windshield washer (3) off of wiper bearing shaft

5

Unscrew nut (4) from wiper bearing shaft

6

Pry wiper arm (5) off of wiper bearing shaft

The wiper arm is attached to the wiper bearing shaft with a finely serrated taper fit.

Installation:
Adjust wiper arms so that wiper blades are located horizontally at the bottom edge of the windshield

7

Remove caps (6) from handle (7)

8

Remove left and right handles

9

Remove paneling (11)

10

Remove linkage lever (9) on wiper motor shaft (10)

Installation:
The linkage lever must be positioned horizontally to the right (3 o'clock position).

11

Separate rear water connection (14) for windshield washer at transition from hose to angle fitting

12

Remove left and right bearing brackets (12)

13

Remove linkage cross member (13) with bearing brackets

14

Reinstall in opposite order

Referenced documents