P82.30-0245-01
P82.30-0240-01
Location of components
1 Cover
2 Nut on wiper arm
3 Electrical connector
4 Connector for washer fluid line
5 Bolt, rear-end door wiper motor
M6/4 Tailgate wiper motor
M6/4k1 Tailgate wiper motor relay
| Removing | ||
Danger! | Risk of injury caused by moving parts that can pinch, crush or, in extreme cases even sever extremities. | Always remove ignition key when working on windshield wiper mechanism. | |
1 | Withdraw ignition key | ||
2 | Remove liner on tailgate | ||
3 | Open the cover (1) | ||
4 | Unscrew nut for wiper arm (2) | ||
5 | Fold back and remove wiper arm | Take care that the washer nozzle is not damaged. | |
6 | Unplug electrical connector (3) | ||
7 | Detach washer fluid line from connector (4) | ||
8 | Remove bolts (5) on rear-end door wiper motor (M6/4) | ||
9 | Remove tailgate wiper motor (M6/4) | ||
| Install | ||
10 | Move wiper motor to parking position | ||
11 | Insert rear-end door wiper motor (M6/4) | If necessary, replace rubber feedthrough of rear window. | |
12 | Tighten bolts (5) on rear-end door wiper motor (M6/4) | ||
13 | Slide washer fluid line onto connector (4) | ||
14 | Mount electrical connector (3). | ||
15 | Mount wiper arm | Take care that the washer nozzle is not damaged. Mount wiper arm such that the wiper arm points to the left (driver side). | |
16 | Fasten wiper arm using nut (2) | ||
17 | Close cover (1) | ||
18 | Install door liner on tailgate |
Referenced documents
- ar6830p1050a Removing and installing liner on tailgate
- as8230z000101a Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism.