ar8230p6400ff

Removing and installing wiper system

Type ar · topic 82.30 · version 0100 · 2004-01-19

Applies to: MODELS 454.0

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.30 Windshield wipers — Series 454 (models 0**)

EinPAS 36 Visibility › 36.30 Wiping/washing › 36.30.50 Windshield wiper system — Series 454 (models 0**)

AR82.30-P-6400FF

Removing and installing wiper system

13.8.03

MODELS 454.0

Removing and installing wiper system

P82.30-2320-06

1 Wiper system

2 Screw

3 Clip

4 Water tank cover

5 Electrical connector

6 Rubber mount

M6/1 Wiper motor

Remove/Install

Danger!

Risk of injury in the form of trapping or crushing, or even severing of limbs, if caught in windshield wiper mechanism

Always remove ignition key when working on windshield wiper mechanism.

AS82.30-Z-0001-01A

1

Remove wiper arms

AR82.30-P-6951FF

2

Remove paneling from center piece in front of windshield

AR88.00-P-2792FF

3

Rotate clips (3) to left and right on water tank cover (4) by 90° and remove

4

Unclip water tank cover (4)

5

Disconnect electrical connector (5) from wiper motor (M6/1).

6

Unscrew bolts (2)

*BA82.30-P-1002-01G

7

Remove wiper system (1) from rubber mount (6)

Always replace wiper motor (M6/1) and wiper linkage together.

8

Install in the reverse order

9

Perform function check

Windshield wiper

Number

Designation

Type
454.0

BA82.30-P-1002-01G

Screw, wiper system to body

Nm

8

Referenced documents