1 | Shims |
2 | Nuts |
3 | Heater housing |
4 | Wiper linkage |
5 | Bolts |
6 | Nut |
7 | Wiper arm |
8 | Electrical connector |
D82.30-0035-06
Danger ! | Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. | When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m). | |
| Remove/install | ||
1 | Remove ignition key from ignition lock | ||
2 | Detach heater housing (3) | Unscrew nuts (2) and remove washers (1). | |
3 | Remove wiper arms (7) | ||
4 | Unscrew nuts (6) | Nut, wiper system to dash support | |
5 | Unscrew screws/bolts (5) | Screw/bolt, implement carrier of windshield wiper to bracket | |
6 | Disconnect electrical connection (8) | ||
7 | Pull out wiper linkage (4) below dash support | ||
8 | Install in the reverse order | ||
9 | Carry out function check |
Referenced documents
- ar8230d6100f Remove and install wiper arm
- as8230z000101a Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism.