Remove/install rear-end door wiper motor

AR82.30-D-6551TS

Remove/install rear-end door wiper motor

02.05.2018

Model

907.6/7, 910.6

Shown on model 910.6 at the left rear-end door (7)

1

Wiper motor

2

Cover

3

Washer fluid hose

4

Connection fitting

5

Electrical connector

6

Bolts

7

Rear-end door

 Danger

Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin.

Wear protective clothing and tight-fitting safety glasses. No open flames, fire or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leakfree in safely closed original containers and out of the reach of children.

AS82.35-Z-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove wiper arm of rear window.

AR82.30-D-6981TS

2.1

Remove trim of rear-end door (7).

Model 907.6/7
with code VA5 (Fully lined hinged rear doors)

AR72.20-D-6615TS

2.2

Remove cover (2).

Model 907.6/7
except code VA5 (Fully lined hinged rear doors)
Model 910.6

3

Detach washer fluid hose (3) from connection fitting (4).

4

Disconnect electrical connector (5).

5

Remove screws (6) and take out wiper motor (1) from rear-end door (7).

6

Install in the reverse order.