ar8225p1202ea

Removing and installing bulb of front turn signal lamp

Type ar · topic 82.25 · version 0106 · 2004-10-21

Applies to: MODEL 129, 202

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.25 Signaling equipment/Emergency alarm system — Series 129 · Series 202

EinPAS 30 Lighting system › 30.15 Exterior lights › 30.15.40 Headlamp — Series 129 · Series 202

AR82.25-P-1202EA

Removing and installing bulb of front turn signal lamp

9.7.93

MODEL 129, 202

Removing and installing bulb of front turn signal lamp

P82.10-0005-06

Shown on model 202

14 Electrical connector

15 Turn signal socket

16 Turn signal bulb

E6/1 Left turn signal lamp

E6/2 Right turn signal lamp

Removal, installation

1

Open engine hood, raise to upright position

Model 202

AR88.40-P-1000E

Model 129 see Owner's Manual

2.1

Remove windshield washer water reservoir

Model 129

Only required for right turn signal lamp

3

Unclip turn signal lamp (E6/1, E6/2) and remove

4

Unplug electrical connector (14)

5

Turn socket (15) to the left and take out

6

Turn bulb (16) out of bayonet lock

Do not touch bulb with bare fingers, use grease-free soft rag.

7

Install in the reverse order

8

Carry out operational check

Referenced documents