AR82.15-P-6201RT | Remove/install headlamp cleaning system washer fluid hose | 16.5.05 |
MODEL 251 with CODE (600) Headlamp cleaning system
P82.15-2153-07
1 Washer fluid hose
2 Connection element
3 Connection element
4 Telescopic nozzle
5 Connection element
6 Telescopic nozzle
7 Crossmember
M5/2 HCS [SRA] pump
| Remove/install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer. | |
1 | Remove front section of fender liner in front fender | On both sides of vehicle. | |
2 | Separate washer fluid hose (1) on connection element (2) from HCS pump (M5/2) | Catch washing water flowing out of washer fluid hose (1) and washer fluid reservoir in suitable vessel. | |
3 | Separate washer fluid hose (1) on connection element (3) from telescopic nozzle (4) and remove connection element (5) from telescopic nozzle (6). | ||
4 | Pull washer fluid hose (1) out of crossmember (7) | ||
5 | Install in the reverse order | ||
6 | Fill washer fluid reservoir | ||
| Windshield washer system - inspect fluid level, adjust to correct level | ||
7 | Perform function test on headlamp cleaning system | Switch on ignition and check pump for proper function by actuating combination switch.A sufficient quantity of washer fluid must spray out of the spray nozzle. |
Referenced documents
- ap8235p8210rt Windshield washer system - inspect fluid level, adjust to correct level
- ar8810p1310rt Remove/install fender liner front section in front fender
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.