ar8210y2000a

Remove/install side-marker lamp

Type ar · topic 82.10 · version 0102 · 2019-11-13

Applies to: Model 400.204/207/212/216/231/241/243/262/281

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.10 Exterior lights — Series 400 (models 204, 207, 212, 216, 231, 241, 243, 262, 281)

EinPAS 30 Lighting system › 30.15 Exterior lights › 30.15.43 Position lamp/additional lamp — Series 400 (models 204, 207, 212, 216, 231, 241, 243, 262, 281)

AR82.10-Y-2000A

Remove/install side-marker lamp

13.11.2019

Model

400.204/207/212/216/231/241/243/262/281

Remove/install side-marker lamp

Marker lamp removal and installation procedure

108

Marker lamp unit

109

Marker lamp electrical connector E13.1, E13.2 / E12.1, E12.2

Y82.10-0005-06

Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Topical note

Notes on battery

AH54.10-P-0001-01A

Remove/install

1

Switch off ignition

2

Disconnect ground line of battery

3

Remove marker lamp unit (108) from cabin

4

Disconnect marker lamp electrical connector E13.1, E13.2 / E12.1, E12.2 (109) from marker lamp

5

Install in the reverse order

Referenced documents