ar8210s1203e

Replace bulb of additional turn signal lamp

Type ar · topic 82.10 · version 0101 · 2015-12-17

Applies to: Model 447.6/7 Model 448

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.10 Exterior lights — Series 447 (models 6**, 7**) · Series 448

EinPAS 30 Lighting system › 30.15 Exterior lights › 30.15.42 Side lamp — Series 447 (models 6**, 7**) · Series 448

AR82.10-S-1203E

Replace bulb of additional turn signal lamp

14.12.2015

Model

447.6/7

Model

448

Replace bulb of additional turn signal lamp

S82.10-4605-08

1

Socket

3

Sealing ring

E22/2

Right additional turn signal lamp

2

Bulb

E22/1

Left additional turn signal lamp

Remove/install

1

Release left additional turn signal lamp (E22/1) or right additional turn signal lamp (E22/2) in rear area (arrow A) using a suitable tool and swivel out in direction of arrow

2

Turn socket (1) counterclockwise and remove

3

Remove bulb (2) from socket (1)

Do not touch the glass of the bulb (2) with bare fingers.
Use a non-greasy, soft cloth.

Installation: Check sealing ring (3) for damage.

If the sealing ring (3) is damaged

Replace sealing ring (3).

4

Install in the reverse order

Check

5

Perform function check of left additional turn signal lamp (E22/1) or right additional turn signal lamp (E22/2)