ar8210p5161ea

Removing and installing license plate lamp

Type ar · topic 82.10 · version 0106 · 1998-11-02

Applies to: MODEL 129, 202, 210.2

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.10 Exterior lights — Series 129 · Series 202 · Series 210 (models 2**)

EinPAS 30 Lighting system › 30.15 Exterior lights › 30.15.41 Rear lamp — Series 129 · Series 202 · Series 210 (models 2**)

AR82.10-P-5161EA

Removing and installing license plate lamp

9.7.93

MODEL 129, 202, 210.2

Removing and installing license plate lamp

P82.10-0003-06

46 Screws

47 Electrical connection

E19/1 Left license plate lamp

E19/2 Right license plate lamp

The figure shows removal of the license plate lamp on model 202 sedan.
Removal on the T-model 202 and model 210 and on roadster model 129 is identical.

Removal, installation

1

Unscrew screws (46)

2

Take out license plate lamp (E19/1, E19/2)

Installation: Ensure that gasket is in good condition and properly seated.

3

Unplug electrical connections (47)

4

Install in the reverse order

5

Check for proper function