ar8210p4301ea

Removing and installing positioning element in the headlamp unit

Type ar · topic 82.10 · version 0106 · 2000-03-14

Applies to: MODEL 202 up to 31.8.96

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.10 Exterior lights — Series 202

EinPAS 30 Lighting system › 30.15 Exterior lights › 30.15.30 Headlamp range adjustment — Series 202

EinPAS 30 Lighting system › 30.15 Exterior lights › 30.15.40 Headlamp — Series 202

AR82.10-P-4301EA

Removing and installing positioning element in the headlamp unit

9.7.93

MODEL 202 up to 31.8.96

Removing and installing positioning element in the headlamp unit

P82.10-0002-06

1 Locking bar

2 Housing cover

18 Positioning element

19 Pneumatic line

Removal

1

Open engine hood, move to upright position

AR88.40-P-1000E

2

Fold open locking bar (1)

3

Take off housing cover (2)

4

Unclip red locking clip on positioning element (18)

5

Detach pneumatic line (19)

6.1

Turn left positioning element (18) 45° to the right and remove

6.2

Turn right positioning element (18) 45° to the left and remove

Installation

7.1

Insert left positioning element (18) and turn 45° to the left

7.2

Insert right positioning element (18) and turn 45° to the right

8

Fit on pneumatic line (19)

9

Clip reflector into place at positioning element (18) and secure with red locking clip

10

Fit on housing cover (2)

11

Close locking bar (1)

12

Check headlamp adjustment, correct

AP82.10-P-8260A

Referenced documents