ar8210d5375a

Remove/install center high-mounted stop lamp

Type ar · topic 82.10 · version 0100 · 2004-11-02

Applies to: MODEL 903.662 with CODE (ZU8) National version for USA with CODE (Z29) "James Cook" touring camper, NAFTA In raised roof

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.10 Exterior lights — Series 903 (models 662)

EinPAS 30 Lighting system › 30.15 Exterior lights › 30.15.41 Rear lamp — Series 903 (models 662)

AR82.10-D-5375A

Remove/install center high-mounted stop lamp

1.7.04

MODEL 903.662
with CODE (ZU8) National version for USA
with CODE (Z29) "James Cook" touring camper, NAFTA
In raised roof

Remove/install center high-mounted stop lamp
Remove/install center high-mounted stop lamp

D82.10-1109-01

1 High roof

2 Bolts

3 Electrical connectors

E12 Additional stop lamp

D82.10-1110-01

Remove/Install

Danger!

Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area.

Perform works on or in the area of the vehicle roof only on suitable auxiliary implements (ladders, scaffolding, assembly platforms). Secure working area adequately.

AS65.00-Z-0002-01B

1

Unscrew bolts (2)

2

Remove additional stop lamp (E12)

Installation: Observe routing of electrical line behind additional stop lamp (E12).

3

Disconnect electrical couplings (3)

4

Install in the reverse order

5

Perform a function test

Referenced documents