ar8210d4656ts

Remove/install LED module for front lamp unit

Type ar · topic 82.10 · version 0100 · 2018-05-10

Applies to: Model 907, 910 with code LG7 (LED high-performance headlamps)

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.10 Exterior lights — Series 907 · Series 910

EinPAS 30 Lighting system › 30.15 Exterior lights › 30.15.11 Control unit/relay — Series 907 · Series 910

AR82.10-D-4656TS

Remove/install LED module for front lamp unit

27.04.2018

Model

907, 910

with code LG7 (LED high-performance headlamps)

Remove/install LED module for front lamp unit

D82.10-1232-77

Shown on left lamp unit at front (2)

1

LED module

3

Bolts

5

Seal

2

Front lamp unit

4

Electrical connector

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Carry out commissioning of left or right LED module (1) using vehicle diagnosis system.

If the LED module (1) is replaced.

AD00.00-D-2000-06TS

Installation: Note content of data matrix code located on left or right lamp unit at front (2).

2

Remove left or right lamp unit at front (2).

AR82.10-D-4733TS

3

Unscrew bolts (3).

4

Remove LED module (1) from the lamp unit at front (2) until the electrical connector (4) is accessible.

Installation: Ensure that seal (5) is seated properly.

5

Disconnect electrical connector (4) and remove LED module (1).

6

Install in the reverse order.

Referenced documents