ar8210d2002ts

Remove/install side marker lamp

Type ar · topic 82.10 · version 0100 · 2017-12-29

Applies to: Model 907.6/7, 910.6 with code LB1 (Side marker lights)

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.10 Exterior lights — Series 907 (models 6**, 7**) · Series 910 (models 6**)

EinPAS 30 Lighting system › 30.15 Exterior lights › 30.15.43 Position lamp/additional lamp — Series 907 (models 6**, 7**) · Series 910 (models 6**)

AR82.10-D-2002TS

Remove/install side marker lamp

13.12.2017

Model

907.6/7, 910.6

with code LB1 (Side marker lights)

Remove/install side marker lamp

Shown on left side of vehicle

1

Spring U-bolt

2

Side-marker lamp

3

Protective strip

4

Electrical connector

D82.10-1216-04

Remove/install

1

Carefully unclip the spring U-bolts (1) at the front on the side marker lamp (2) from the protective strip (3)

Clip remover

*452589016300

2

Unhook side marker lamp (2) at rear on protective strip (3) and remove far enough until the electrical connector (4) is accessible

3

Disconnect electrical connector (4) and remove side marker lamp (2)

4

Install in the reverse order

Check

5

Check function of side marker lamp (2)

Remove/install side marker lamp

452 589 01 63 00

Clip remover