ar8061p0010tx

Remove, install Keyless Go control unit

Type ar · topic 80.61 · version 0201 · 2010-04-27

Applies to: MODEL 219.3 with CODE (889) Keyless Go Left rear door Keyless-Go control unit, right rear door Keyless-Go control unit

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.61 Keyless-Go/Keyless-Entry — Series 219 (models 3**)

EinPAS 29 Drive authorization/security system › 29.15 KEYLESS-GO › 29.15.11 Control unit/relay — Series 219 (models 3**)

AR80.61-P-0010TX

Remove, install Keyless Go control unit

22.4.10

MODEL 219.3 with CODE (889) Keyless Go
Left rear door Keyless-Go control unit, right rear door Keyless-Go control unit

Remove, install Keyless Go control unit

P80.35-2220-06

1 Insulation mat

2 Retaining plate

N69/8 Left rear door KEYLESS-GO control unit

N69/9 Right rear door KEYLESS-GO control unit

Remove/install

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Remove door lining from left or right rear door

AR72.12-P-1010TX

2

Loosen insulation mat (1) and disconnect electrical connector from left rear door Keyless-Go control unit (N69/8) or right rear door Keyless-Go control unit (N69/9)

3

Unlock left rear door Keyless-Go control unit (N69/8) or left rear door Keyless-Go control unit (N69/9) on retaining lugs (arrows), slide toward rear and remove from retaining plate (2)

Installation: Ensure that left rear door Keyless-Go control unit (N69/8) or left rear door Keyless-Go control unit (N69/9) are seated correctly on retaining plate (2).

4

Install in the reverse order

Referenced documents