ar8061d2801a

Remove/install Keyless Go/Keyless Entry sliding door antenna

Type ar · topic 80.61 · version 0100 · 2006-01-31

Applies to: MODEL 906.6 /7 with CODE (FY9) Keyless Entry+Slide

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.61 Keyless-Go/Keyless-Entry — Series 906 (models 6**, 7**)

EinPAS 29 Drive authorization/security system › 29.15 KEYLESS-GO › 29.15.14 Transmitter/receiver — Series 906 (models 6**, 7**)

AR80.61-D-2801A

Remove/install Keyless Go/Keyless Entry sliding door antenna

24.11.05

MODEL 906.6 /7 with CODE (FY9) Keyless Entry+Slide

Remove/install Keyless Go/Keyless Entry sliding door antenna

D80.61-0002-01

1 Plug connector

2 Bolts

3 Bracket

4 Retaining lug

A2/101 Keyless Entry right sliding door antenna

A2/102 Keyless Entry left sliding door antenna

Remove/install

1

Remove door trim of sliding door

AR72.16-D-6610G

2

Disconnect plug connector (1) from Keyless Entry right sliding door antenna (1) (A2/101) and Keyless Entry left sliding door antenna (A2/102)

3

Slide Keyless Entry right sliding door antenna (A2/101) and Keyless Entry left sliding door antenna (A2/102) toward right

To remove, slide Keyless Entry right sliding door antenna (A2/101) and Keyless Entry left sliding door antenna (A2/102) in direction of arrow, press retaining lugs (4) out on rear of bracket (3) and remove antenna toward rear.

4

Install in the reverse order

Referenced documents